Effect of SIMS ionization probability on depth resolution for organic/inorganic interfaces

Secondary ion mass spectrometry (SIMS) relies on the fact that surface particles ejected from a solid surface are ionized under ion bombardment. By comparing the signal of molecular secondary ions desorbed from an organic film with that of the corresponding sputtered neutral precursor molecules, we investigate the variation of the molecular ionization probability when depth profiling through the film to the substrate interface. As a result, we find notable variations of the ionization probability both at the original surface and in the interface region, leading to a strong distortion of the measured SIMS depth profile. The experiments show that the effect can act in two ways, leading either to an apparent broadening or to an artificial sharpening of the observed film‐substrate transition. As a consequence, we conclude that care must be taken when assessing interface location, width, or depth resolution from a molecular SIMS depth profile.     

Interrelationship between total volatile organic compounds emissions,structure and properties of natural rubber/polycaprolactone bio-blends cross-linked with peroxides

Natural rubber/polycaprolactone (NR/PCL) bio-based blends with different organic peroxides were prepared using an internal batch mixer and subsequently cross-linked at 170 °C. Two types of commonly used organic peroxides, dicumyl peroxide and di(tert-butylperoxyisopropyl)benzene peroxide, were applied as free-radical initiator. Cross-linking efficiency of NR/PCL blends were investigated using oscillating disc rheometer measurements, followed by infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis and tensile testing. Total volatile organic compounds (TVOCs) emissions were determined using headspace analysis integrated with gas chromatography with flame ionization detector. Determined TVOCs emissions varying in range 21.6–52.1 μg/g and generally value of this parameter decreased with increasing content of PCL phase in studied blends or with application of more efficient di(tert-butylperoxyisopropyl)benzene peroxide as cross-linking agent. It was found that increasing of TVOCs parameter indicated deterioration of mechanical properties of NR/PCL blends, which corresponded with the changes in chemical structure and thermal properties of cross-linked NR/PCL. This confirms that evaluation of TVOCs parameter is interesting alternative for “conventional methods” to characterization of the studied bio-based blends.     

Effect of organic acid chain length on foam performance in a porous medium

We have systematically studied the effect of organic acid chain length on surface dilatational properties and foam flow performance in a porous medium. Surface dilatational properties were studied by oscillating drop module (ODM). ODM results in deionized water show that sufficient long chain length of organic acid is an essential requirement for high surface dilatational modulus. While, to various salinities, surfactant to acid ratio of achieving high surface dilatational modulus varies. Foam flow tests show that surface dilatational modulus has decisive effect on produced foam size, which partially determines foam flow pressure drop. Both surface dilatational modulus and surface tension determine foam flow pressure drop. Besides, surface loss modulus also contributes to pressure drop. Bulk foam tests show that addition of organic acids with proper chain length can enhance foam tolerance to oil significantly. Compared with alkane chain length, acid with longer chain has good ability in stabilizing foam. At last, foam flooding tests show that surface dilatational modulus and foam tolerance to oil play important roles in foam enhanced oil recovery.     

SiO2-Al2O3玻纤载体负载CuO-CeO2对挥发性有机化合物催化燃烧性能研究

采用等体积共浸渍法制备了CuO-CeO₂整体式催化剂,评价了催化剂对乙酸乙酯、异丙醇及甲苯的催化燃烧性能。采用N₂吸附-脱附、X射线衍射（XRD）、氢气程序升温还原（H₂-TPR）、氨气程序升温脱附（NH₃-TPD）以及挥发性有机化合物脱附等手段对催化剂进行了表征。表征数据显示,氧化铜以高分散态均匀分散存在于载体表面,氧化铈则是小的纳米颗粒,氧化铈颗粒粒径随着Cu/Ce物质的量比的减小而增大。添加铈氧化物会显著增加总酸量,特别是路易斯酸酸位的量,同时增强了乙酸乙酯和异丙醇的吸附量,吸附量的增加提高了催化剂对乙酸乙酯和异丙醇的催化燃烧性能。从甲苯的催化燃烧实验可以看出,大量添加CeO₂稍微增加了甲苯的吸附容量,减弱了催化剂的还原性、降低了活性氧的含量,最终导致甲苯的低转化率。催化行为由氧化铜、氧化铈以及载体三者之间的共同作用决定,这三者的协同作用不仅影响着表面氧的活性同时影响着催化剂对甲苯的吸附能力。     

利用代谢组学研究大气细颗粒物的生殖毒性效应

大气细颗粒物(PM2.5)污染已成为严峻的环境问题,探究PM2.5的毒性效应和机理变得尤为重要.本研究利用基于液相色谱/质谱的代谢组学技术,分析经PM2.5悬混液气管滴注暴露后成年雄性大鼠睾丸代谢组的全局变化,采用偏最小二乘判别分析法和非参数检验进行统计分析.结果表明,PM2.5暴露组大鼠睾丸的油提和水提代谢指纹谱均可与对照组实现准确区分,表明PM2.5暴露对大鼠睾丸的整体代谢网络产生了显著影响,最终鉴定出56个差异代谢物.通路分析显示,PM2.5暴露会引起大鼠睾丸的氨基酸和核苷酸代谢紊乱、类固醇激素代谢失衡以及脂类代谢异常,而这些重要通路可能是PM2.5生殖毒性的关键分子事件.     

金属-有机纳米管分散固相萃取-气相色谱-串联质谱高灵敏分析环境水样中痕量多氯联苯

采用含铅金属-有机纳米管为吸附剂,基于分散固相萃取和气相色谱-串联质谱建立了一种高灵敏分析环境水样中痕量多氯联苯的方法.采用正交设计响应面法对影响萃取效果的重要因素(如离子强度、萃取时间和吸附剂用量等)进行了优化.获得的最优条件为:离子强度4.92 %(w/V)NaCl,萃取时间4.5 min,正己烷为解吸剂,吸附剂用量62.5 mg.在优化条件下,方法的线性范围为2~1000 ng/L,检出限为0.26~0.82 ng/L. 日内和日间相对标准偏差分别为0.8%~5.5% (200 ng/L, n=6)和2.7%~7.4% (200 ng/L, n=6).将本方法应用于实际环境水样中多氯联苯的分析,回收率为78.9%~113.3%,结果满意.     

基于金纳米颗粒负载的金属有机骨架材料的癌胚抗原传感器的研制

以负载Au的金属有机骨架材料(AuNPs/Cu-TPA)标记CEA抗体(Ab2)为信号探针,通过电还原的方法将氧化石墨烯还原到电极上,研制了一种捕获CEA抗体(Ab1)的电化学免疫传感器,并将其应用于癌胚抗原(CEA)检测.所合成的MOFs材料中含有大量Cu2+,且电化学信号比较稳定,因此可以通过检测MOFs材料中Cu2+的信号实现对CEA的检测.此信号探针不需要预处理和酸处理,易负载贵金属从而固定抗体,大大简化了检测步骤并缩短了检测时间.此传感器对CEA的检测灵敏度好,操作简便.在最优实验条件下,此传感器的线性范围为0.1～ 80 ng/mL,检出限为0.03 ng/mL,线性相关系数为0.9887,可用于真实样品中CEA的测定.     

Synthesis,Characterization and Thermal Behaviors of 4-Amino-5-nitro-1,2,3-triazole(ANTZ)and Its Derivatives

4‐Amino‐5‐nitro‐1,2,3‐triazole (ANTZ) and its derivatives, such as 2‐(4‐amino‐5‐nitro‐1,2,3‐trazole‐1‐yl)‐1,3,5‐trinitrobenzene (T‐ANTZ) and 4‐amino‐5‐nitro‐1,2,3‐triazole (M‐ANTZ), were synthesized and characterized, whose structures were confirmed by IR, NMR and elemental analysis. The thermal behaviors of ANTZ, T‐ANTZ and M‐ANTZ were studied by the methods of DSC and TG‐DTG, and the results showed that there is an obvious melting process of ANTZ with melting point of 278.38°C, while there is no melting process in the thermal behavior of T‐ANTZ and M‐ANTZ (the derivatives of ATNZ).     

固相微萃取-气相色谱法测定食品包装材料中残留有机溶剂

提出了一种以固相微萃取与气相色谱-氢火焰联用技术为基础的测定食品包装材料中15种常用有机溶剂(苯类、醇类、酮类、酯类等)的方法。选择聚二甲亚砜作为固相微萃取的萃取相,采用DB-624毛细管色谱柱进行分离。在优化的试验条件下,15种有机残留溶剂在20min内能很好地分离,15种溶剂的测定下限(10S/N)为0.08～0.69μg.dm-2。加标回收率为60.0%～115.0%,相对标准偏差(n=5)为2.17%～8.34%。     

含1-[二-(4-氟苯)甲基]哌嗪均三氮唑环的Mannich碱的合成及表征

微波辐射下,在冰醋酸中,3-甲基-4-氨基-1,2,4-三氮唑-5-硫酮1与芳香醛经微波辐射制得相应的中间体Schiff碱2(a~j),然后中间体2与1-[二-(4-氟苯)甲基]哌嗪于室温反应制得10个新的Mannich碱3(a~j).合成的10个目标化合物通过熔点测定和质谱、红外光谱、核磁共振氢谱分析、元素分析对其结构进行确证。